View B39881B8556P810_8985495.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

saw components saw duplexer cellular / wcdma band v series/type: ordering code: b8556 B39881B8556P810 date: version: august 29, 2011 2.1 ? epcos ag 2015. reproduction, publicati on and dissemination of this publicatio n, enclosures hereto and the information contained therein without epcos' pr ior express consent is prohibited. epcos ag is a tdk group company.
2 august 29, 2011 b8556 836.50 / 881.50 mhz please read cautions and warnings and important notes at the end of this document. saw components saw duplexer data sheet application n multimode saw duplexer for mobile telephone cellular/wcdma band v systems n low insertion attenuation n low amplitude ripple n high tx band isolation n single ended to balanced transformation in antenna - rx path n impedance transformation 50 w to 100 w in antenna - rx path features n component size 2.0 x 1.6 mm 2 n component height 0.47 mm max. n rohs compatible n package for s urface m ount t echnology ( smt ) n ni, gold-plated terminals n e lectrostatic s ensitive d evice ( esd ) n m oisture s ensitivity l evel ( msl ) 3 bottom view side view top view 9 0.35 0.29 0.43 0.33 0.29 2.0 1.6 0.47 max. 0.7 3 2 1 5 7 4 8 6 5 3 2 1 8 4 6 7 pin configuration n 1 tx input n 3, 4 rx output (balanced) n 6 antenna n 2, 5, 7, 8, 9 to be grounded
3 august 29, 2011 b8556 836.50 / 881.50 mhz saw components saw duplexer data sheet please read cautions and warnings and important notes at the end of this document. characteristics temperature range for specification: t = C30 ?c to +85 ?c antenna terminating impedance: z ant = 50 w ll 14 nh rx terminating impedance: z rx = 100 w (balanced) tx terminating impedance: z tx = 50 w characteristics tx - ant min. typ. @ 25 ?c max. center frequency f c 836.5 mhz maximum insertion attenuation a max 824.0 ... 849.0 mhz 1.8 2.3 db @f carrier 826.4 ... 846.6 mhz a wcdma 1) 1) attenuation of wcdma signal (power transfer function). please refer to annotation on page (8). 1.5 2.0 2) 2) temperature range for this parameter is -20 o c to +85 o c. db amplitude ripple da 824.0 ... 849.0 mhz 0.9 1.5 db @f carrier 826.4 ... 846.6 mhz a wcdma 1) 0.5 1.2 2) db error vector magnitude @f carrier 826.4 ... 846.6 mhz evm 3) 3) error vector magnitude (evm) based on definition given in 3gpp ts 25.141. 2.0 3.0 2) % input vswr (tx port) 824.0 ... 849.0 mhz 1.9 2.2 output vswr (ant port) 824.0 ... 849.0 mhz 1.7 2.1
4 august 29, 2011 b8556 836.50 / 881.50 mhz please read cautions and warnings and important notes at the end of this document. saw components saw duplexer data sheet characteristics temperature range for specification: t = C30 ?c to +85 ?c antenna terminating impedance: z ant = 50 w ll 14 nh rx terminating impedance: z rx = 100 w (balanced) tx terminating impedance: z tx = 50 w characteristics tx - ant min. typ. @ 25 ?c max. absolute attenuation a 1.0 ... 10.0 mhz 20 70 db 10.0 ... 420.0 mhz 30 42 db 420.0 ... 494.0 mhz 35 39 db 494.0 ... 701.0 mhz 30 38 db 701.0 ... 728.0 mhz 35 39 db 728.0 ... 764.0 mhz 35 40 db 764.0 ... 804.0 mhz 30 34 db 860.0 ... 869.0 mhz 3 24 db 869.0 ... 894.0 mhz 44 50 db 1565.42 ... 1573.374 mhz 35 40 db 1573.374 ... 1577.466 mhz 35 40 db 1577.466 ... 1585.42 mhz 35 40 db 1597.5515 ... 1605.886 mhz 35 39 db 1605.886 ... 1607.0 mhz 35 39 db 1638.0 ... 1648.0 mhz 20 38 db 1648.0 ... 1698.0 mhz 30 37 db 1698.0 ... 1708.0 mhz 20 37 db 1844.9 ... 1879.9 mhz 30 34 db 1884.5 ... 1919.6 mhz 29 34 db 1930.0 ... 1990.0 mhz 27 33 db 2110.0 ... 2170.0 mhz 23 31 db 2400.0 ... 2557.0 mhz 23 27 db 3286.0 ... 3406.0 mhz 19 24 db 4110.0 ... 4255.0 mhz 16 19 db 4934.0 ... 5350.0 mhz 11 17 db 5350.0 ... 5725.0 mhz 10 17 db 5725.0 ... 5953.0 mhz 9 16 db
5 august 29, 2011 b8556 836.50 / 881.50 mhz saw components saw duplexer data sheet please read cautions and warnings and important notes at the end of this document. characteristics temperature range for specification: t = C30 ?c to +85 ?c antenna terminating impedance: z ant = 50 w ll 14 nh rx terminating impedance: z rx = 100 w (balanced) tx terminating impedance: z tx = 50 w characteristics ant - rx min. typ. @ 25 ?c max. center frequency f c 881.5 mhz maximum insertion attenuation a max 869.0 ... 894.0 mhz 2.0 2.5 db @f carrier 871.4 ... 891.6 mhz a wcdma 1) 1) attenuation of wcdma signal (power transfer function). please refer to annotation on page (8). 1.9 2.2 2) 2) temperature range for this parameter is -20 o c to +85 o c. db amplitude ripple (p-p) da 869.0 ... 894.0 mhz 0.7 1.3 db @f carrier 871.4 ... 891.6 mhz a wcdma 1) 0.6 1.0 2) db error vector magnitude @f carrier 871.4 ... 891.6 mhz evm 3) 3) error vector magnitude (evm) based on definition given in 3gpp ts 25.141. 1.9 3.2 2) % input vswr (ant port) 869.0 ... 894.0 mhz 1.8 2.1 output vswr (rx port) 869.0 ... 894.0 mhz 2.0 2.3 common mode rejection ratio 869.0 ... 894.0 mhz cmrr 23 4) 4) a combination of 10 o phase balance and 1 db amplitude balance corresponds to 19.6 db cmrr 37 4) db
6 august 29, 2011 b8556 836.50 / 881.50 mhz please read cautions and warnings and important notes at the end of this document. saw components saw duplexer data sheet characteristics temperature range for specification: t = C30 ?c to +85 ?c antenna terminating impedance: z ant = 50 w ll 14 nh rx terminating impedance: z rx = 100 w (balanced) tx terminating impedance: z tx = 50 w characteristics ant - rx min. typ. @ 25 ?c max. imd product level limits 1) at f tx = 836.5 mhz f rx = 881.5 mhz 1) power levels: 21.5 dbm tx signal, -15dbm blocker at antenna port. blocker 1 45.0 mhz -137 -106 dbm blocker 2 791.5 mhz -114 -109 dbm blocker 3 1718.0 mhz -92 -88 dbm blocker 4 2554.5 mhz -120 -109 dbm attenuation a 10.0 ... 447.0 mhz 45 80 db 447.0 ... 779.0 mhz 30 71 db 779.0 ... 824.0 mhz 38 65 db 824.0 ... 849.0 mhz 55 60 db 849.0 ... 854.0 mhz 10 60 db 909.0 ... 1000.0 mhz 13 24 db 1000.0 ... 1693.0 mhz 28 62 db 1693.0 ... 1743.0 mhz 30 62 db 1743.0 ... 1850.0 mhz 28 61 db 1850.0 ... 1920.0 mhz 40 60 db 1920.0 ... 2400.0 mhz 35 57 db 2400.0 ... 2500.0 mhz 45 56 db 2500.0 ... 5100.0 mhz 35 48 db 5100.0 ... 6000.0 mhz 41 47 db
7 august 29, 2011 b8556 836.50 / 881.50 mhz saw components saw duplexer data sheet please read cautions and warnings and important notes at the end of this document. characteristics temperature range for specification: t = C30 ?c to +85 ?c antenna terminating impedance: z ant = 50 w ll 14 nh rx terminating impedance: z rx = 100 w (balanced) tx terminating impedance: z tx = 50 w characteristics tx - rx min. typ. @ 25 ?c max. isolation 824.0 ... 849.0 mhz 60 67 db @f carrier 826.4 ... 846.6 mhz a wcdma 1) 1) attenuation of wcdma signal (power transfer function). please refer to annotation on page (8). 60 2) 2) temperature range for this parameter is -20 o c to +85 o c. 68 db 869.0 ... 894.0 mhz 50 54 db @f carrier 871.4 ... 891.6 mhz a wcdma 1) 50 2) 53 db 1574.0 ... 1577.0 mhz 40 70 db 1638.0 ... 1708.0 mhz 20 71 db 2462.0 ... 2557.0 mhz 20 63 db common mode isolation 824.0 ... 849.0 mhz 55 60 db @f carrier 826.4 ... 846.6 mhz a wcdma 1) 55 2) 60 db
8 august 29, 2011 b8556 836.50 / 881.50 mhz please read cautions and warnings and important notes at the end of this document. saw components saw duplexer data sheet maximum ratings annotation for characteristics section attenuation of wcdma signal (power transfer function, a wcdma ) is determined by f carrier according to 3gpp ts 25.101 (e.g. for wcdma band 5-passband, f carrier ranges from 826.4 mhz (lowest tx channel) to 846.6 mhz (highest tx channel)). h rrc (f) is the transfer func- tion of the root-raised cosine transmit pulse shaping filter according to 3gpp ts 25.101 with the following normalization: storage temperature range t stg C40/+85 ?c dc voltage v dc 5 v esd voltage v esd 250 1) 1) acc. to jesd22-a114f (human body model), 1 negative & 1 positivie pulse. v human body model, 1 pulse 300 2) 2) acc. to jesd22-c101e (charged device model), 3 negative & 3 positivie pulses. v charged device model, 3 pulses 100 3) 3) acc. to jesd22-a115c (machine model), 10 negative & 10 positive pulses. machine model, 10 pulses input power at p in source and load impedance 50 w 824.0 ... 849.0 mhz elsewhere 29 10 dbm dbm wcdma up wave t = 55?c, 1000 h } s sd 21 f ( ) h rrc f f carrier C ( ) 2 fd C h rrc f ( ) 2 f 1 = d C
9 august 29, 2011 b8556 836.50 / 881.50 mhz saw components saw duplexer data sheet please read cautions and warnings and important notes at the end of this document. frequency response tx-ant (passband) frequency response tx-ant (wideband)
10 august 29, 2011 b8556 836.50 / 881.50 mhz please read cautions and warnings and important notes at the end of this document. saw components saw duplexer data sheet frequency response rx-ant (passband) frequency response rx-ant (wideband)
11 august 29, 2011 b8556 836.50 / 881.50 mhz saw components saw duplexer data sheet please read cautions and warnings and important notes at the end of this document. frequency response tx-rx (passband differential mode isolation) frequency response tx-rx (wideband differential mode isolation)
12 august 29, 2011 b8556 836.50 / 881.50 mhz please read cautions and warnings and important notes at the end of this document. saw components saw duplexer data sheet frequency response tx-rx (passband common mode isolation) frequency response tx-rx (wideband common mode isolation)
13 august 29, 2011 b8556 836.50 / 881.50 mhz saw components saw duplexer data sheet please read cautions and warnings and important notes at the end of this document. matching (tx, rx, ant)
14 august 29, 2011 b8556 836.50 / 881.50 mhz please read cautions and warnings and important notes at the end of this document. saw components saw duplexer data sheet references type b8556 ordering code B39881B8556P810 marking and package c61157-a8-a40 packaging f61074-v8247-z000 date codes l_1126 s-parameters b8556_un_nb.s4p, b8556_un_wb.s4p; see file header for pin/port assignments; soldering profile s_6001 rohs compatible defined as compatible with the following documents: "directive 2002/95/ec of the european parliament and of the council of 27 january 2003 on the restriction of the use of certain hazardous substances in electrical and electronic equipment. 2005/618/ec from april 18th, 2005, amending directive 2002/95/ec of the european parliament and of the council for the purposes of establishing the maxi- mum concentration values for certain hazardous substances in electrical and electronic equipment." matching coils see inductor pdf-catalog http:// www .tdk.co.jp/tefe02/coil.htm#aname1 and data library for circuit simulation http://www.tdk.co.jp/etvcl/index.htm for a large variety of matching coils. for further information please contact your local epcos sales office or visit our webpage at www.epcos.com . published by epcos ag systems, acoustics, waves business group p.o. box 80 17 09, 81617 munich, germany ? epcos ag 2011. this brochure replaces the previous edition. for questions on technology, prices and delivery please contact the sales offices of epcos ag or the international representatives. due to technical requirements components may contain dangerous substances. for information on the type in question please also contact one of our sales offices.
15 august 29, 2011 important notes the following applies to all products named in this publication: 1. some parts of this publication contain statements about the suitability of our products for certain areas of application . these statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. we nevertheless expressly point out that such statements cannot be regarded as binding statements about the suitability of our products for a particular customer application. as a rule, epcos is either unfamiliar with individual customer applications or less familiar with them than the customers themselves. for these reasons, it is always ultimately incumbent on the customer to check and decide whether an epcos product with the properties described in the product speci?cation is suitable for use in a particular customer application. 2. we also point out that in individual cases, a malfunction of electronic components or failure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as speci?ed. in customer applications requiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of an electronic component could endanger human life or health (e.g. in accident prevention or life-saving systems), it must therefore be ensured by means of suitable design of the customer application or other action taken by the customer (e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by third parties in the event of malfunction or failure of an electronic component. 3. the warnings, cautions and product-speci?c notes must be observed. 4. in order to satisfy certain technical requirements, some of the products described in this publication may contain substances subject to restrictions in certain jurisdictions (e.g. because they are classed as hazardous) . useful information on this will be found in our material data sheets on the internet (www.epcos.com/material). should you have any more detailed questions, please contact our sales of?ces. 5. we constantly strive to improve our products. consequently, the products described in this publication may change from time to time . the same is true of the corresponding product speci?cations. please check therefore to what extent product descriptions and speci?cations contained in this publication are still applicable before or when you place an order. we also reserve the right to discontinue production and delivery of products . conse- quently, we cannot guarantee that all products named in this publication will always be available. the aforementioned does not apply in the case of individual agreements deviating from the foregoing for customer-speci?c products. 6. unless otherwise agreed in individual contracts, all orders are subject to the current version of the general terms of delivery for products and services in the electrical industry published by the german electrical and electronics industry association (zvei) . 7. the trade names epcos, baoke, alu-x, ceradiode, csmp, cssp, ctvs, deltacap, digisimic, dssp, formfit, miniblue, minicell, mkd, mkk, mlsc, motorcap, pcc, phasecap, phasecube, phasemod, phicap, siferrit, sifi, sikorel, silvercap, simdad, simic, simid, sineformer, siov, sip5d, sip5k, thermofuse, windcap are trademarks registered or pending in europe and in other countries. further information will be found on the internet at www.epcos.com/trademarks.

▲Up To Search▲

Price & Availability of B39881B8556P810

	To Download B39881B8556P810 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .